GATE-GUARD® „Not-Öffnung“

follow the link to see the video


the pivotable restraint system at central reserve crossings. Flexible direction of traffic at containment level H2 with integrated emergency gate.

Maintenance Crossing and Contra Flow Points

GATE-GUARD was designed to create easily accessible maintenance crossing points. These points are often located at the end of bridges and tunnels. GATE-GUARD is the ideal product, when carriage ways must be kept fully open during peak traffic hours (day time) and then, at low traffic, is switched to contra flow situations (night time).

Just two people can easily open GATE-GUARD in less than 15 minutes. No special tools are necessary. All that needs to be done, is to loosen the connecting box beam elements, remove ground anchors and lower the built-in wheels with a hand crank. The system then moves very easily. It is capable of being opened up to 60º in both directions.

Minimum standard length is 48 m. GATE-GUARD is modular and can be adapted to the local requirements, by simply upgrading with one or more 4.000 mm elements.

Gate Guard

is an SGGT development based on the well known VARIO-GUARD system. Existing SOLO-GUARD constructions can be upgraded to the higher contaiment level H2 of the GATE-GUARD construction. Connecting GATE-GUARD to any other restraint system is possible.

GATE-GUARD® has been tested and approved to EN 1317-2 at H2 level, making it one of the best gate systems.



Crashworthy Median Barrier Gate

Flexible direction of traffic
Emergency gate opened
Emergency gate opened
Emergency gate rolled
Emergency gate rolled

The integrated emergency gates are highlighted to facilitate locating. They are 4.000 mm wide and can be opened by rescue services or the fire brigade in less than 2 minutes.

In narrow spaces, the emergency gates can be separated completely from the GATE-GUARD construction and rolled parallel to it.